Filter
Top Products
111
Loading 120-size or 220-size (medium format) film
Follow these steps to load 120-size or
220-size format film:
1. Place the 120/220-size film guide on
a flat surface and open the cover for
one of the film holders.
2. Insert the film in the film holder,
making sure the glossy (smooth) side
of the film faces down, and the film
emulsion layer faces up. Then close
the cover.
3. Repeat steps 1 and 2 for all the film
you scan.
4. Place the film guide on the
document table. Align it with
the notch on the transparency
guide as shown.
5. Close the TPU and begin your
scan.
If you’re using
EPSON TWAIN Pro to scan, make sure to select TPU Neg or
TPU Pos as your document source.