Filter
Top Products
126
4. Slide the transportation lock at
the back of the scanner to the
position.
If the carriage does not
automatically return to the home
position, slowly raise the front of
the scanner and hold it up until
the carriage comes to rest in the
home position. Then turn the
transportation lock
counterclockwise to the position.
If you are using a transparency unit and it is switched on, the
scanner carriage will not move to the home position. Remove
the transparency unit first, then perform the steps above. See
the next section for instructions.
Transporting the Transparency Unit
After you’ve removed the transparency unit from the scanner, prepare it for shipping
as follows:
1. Turn the transparency unit so the glass side faces up.
2. Use a Phillips head (cross
head) screwdriver to remove
the shipping screws from
the storage holes.
3. Install the screws into the
shipping holes (the outer
holes).
locked position
storage holes