Filter
Top Products
136
■ Check your computer’s memory. If
you’re running other software at the
same time, using RAM resident
programs, or have many device
drivers, the computer may not have
enough memory. (See your software
and computer manuals.) If you’re
scanning a large image or scanning at
a high resolution, your computer
may not have enough memory to
process the image.
■ Check your software installation.
Make sure that your software is
correctly installed and set up. If all
else fails, uninstall your software,
then reinstall it.
You can’t select any of the following
as your Document Source: Auto
Document Feeder, TPU for Neg.
Film, TPU for Pos. Film . . .
■ Make sure your option is installed
correctly, and that it’s securely
connected to the option (ADF/TPU)
connector. If you need to reinstall the
option or connect it to the option
(ADF/TPU) connector, restart your
computer.
Scanning Problems
The file size is too big . . .
Adjust your scan settings. Try setting at
a lower resolution (dpi), or scan only
part of the image.