Filter
Top Products
117
9. Attach the ADF’s connector to
the scanner’s option (
ADF/TPU
)
interface. Secure the connection
by tightening the connector
screws.
10. Peel the backing from the
stopper and from the paper
out support provided with
the ADF. Then attach the
stopper and paper out
support to the scanner as
shown. Insert the tabs on the
paper out support into the
slots at the right end of the
document table.
There are two stoppers included with the ADF, a light gray one
and a dark gray one. Use the light gray stopper, not the dark gray
stopper.
11. Close the ADF.
If you haven’t connected the scanner to your computer, continue with “Connecting
the Scanner to Your Computer” on page 18.
paper out support
stopper