Filter
Top Products
89
4. When you see the EPSON Screen Calibration
Utility, move the slider right or left until the
stripes match as closely as possible. Then click
OK
.
The EPSON Screen Calibration
Utility calibrates the preview image you see in your EPSON
TWAIN Pro driver to match your monitor settings.
You won’t need to change the screen calibration as long as
you continue to use the same display. If you need to
recalibrate your screen at a later time, open the EPSON
TWAIN Pro window by double-clicking the EPSON TWAIN Pro
icon in the Windows Control Panel. Then click the Screen
Calibration button at the bottom of the window to start the
utility.
5. Follow the instructions on the screen to
install EPSON Scan Server. When you see
the window on the right, make sure
Expression1640XL is selected under
Scanner Selection. Select either Icon or
Dialogbox as the scanner server Startup
Mode
. (See “Changing the Scan Server Start
Up Mode” on page 91 for details.)
6. Click Test to test scanner operation.
OK. Scanner Available appears under
Scanner Information if the scanner is
communicating with the scanner server.
Click OK to close the window.