Filter
Top Products
115
Installing the Automatic Document Feeder
Because the automatic document feeder is heavy, you may want
to have someone help you with this procedure. Also, the document
feeder is large, so be sure to have adequate space around the
scanner.
Follow the steps below to install the automatic document feeder on your scanner:
1. Make sure your scanner is turned
off and unplug the cables.
2. Remove your scanner’s document
cover by grasping the back of
the cover as shown and easing the
cover up.
3. Remove the document guide strip
from the document table.
4. Attach the two feet as shown.
5. Insert the installation screws that
came with the ADF into the
holes in the back of the scanner
and secure them with the
enclosed screwdriver tool, as
shown.