72
This chapter includes the following:
■ How to install, set up and start EPSON Scan Server on the scanner server
■ How to install and start EPSON TWAIN Pro Network on client computers
■ How to begin a scan from the client computer, the scanner server, or the scanner’s
] Start button
■ How to stop a scan in progress.
Setting Up the Scanner Server
You can set up any Windows 95, Windows 98, Windows 2000, or Windows NT 4.0
computer as a scanner server, as long as it has a network interface card installed and is
running the TCP/IP protocol.
Before you begin, make sure to unlock the scanner and connect it to the scanner
server (see Chapter 2, “Setting Up Your Scanner,” for details). If you don’t have the
TCP/IP protocol installed on the scanner server, see Appendix B, “Installing the
TCP/IP Protocol.”
Follow the instructions for your operating system:
■ If you’re running Windows 2000, continue with the next section, “Installing the
Scanner Server Software on Windows 2000.”
■ If you’re running Windows 98, go to “Installing the Scanner Server Software on
Windows 98” on page 78.
■ If you’re running Windows 95 or Windows NT, go to “Installing the Scanner
Server Software on Windows 95 and Windows NT 4.0” on page 84.