Filter
Top Products
206 Using the PostScript Printer Driver
7. Select the printer, then click Next.
8. For Windows Me or 98, select LPT1 as the port the printer is
connected to, then click Next.
For Windows XP, 2000, or NT 4.0, go to the next step.
9. Follow the on-screen instructions for the rest of the
installation.
10. When installation is done, click Finish.
Installing the PostScript printer driver for the USB
interface
Follow the steps below to install the PostScript printer driver for
the USB interface.
c
Caution:
Never use EPSON Status Monitor 3 and PostScript 3 driver at
the same time when the printer is connected via USB port. It may
damage the system.
Note:
❏ The USB interface is not available for printing under Windows NT
4.0.
❏ For Windows Me or 98, if the Windows driver and the Adobe PS
driver for Epson printers with a USB connection have already been
installed on your computer, follow the installation procedure
"Installing the PostScript printer driver for the parallel interface"
on page 204, but make sure to select USB as the port in step 5. If
you have not installed an Epson USB printer driver on your
computer, follow the installation procedure below.
❏ Installing the printer software for Windows XP or 2000 may require
administrator privileges. If you have problems, ask your
administrator for more information.