Filter
Top Products
Using the Control Panel 275
7
7
7
7
7
7
7
7
7
7
7
7
Reserve JobCanceled
The printer cannot store the data of your print job using the
Reserve Job function. The maximum number of print jobs stored
on the printer’s Hard Disk Drive has been reached, or the drive
has no more memory available to store a new job. To store a new
print job, delete a previously stored job. Also, if you have any
Confidential Jobs stored, printing those jobs will make more
memory available.
To clear this error, select Clear Warning from the control panel’s
Reset Menu. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 223.
Reset
The printer’s current interface has been reset and the buffer has
been cleared. However, other interfaces are still active and retain
their settings and data.
Reset All
All printer settings have been reset to the default configuration,
or to the last settings that were saved.
Reset to Save
A control panel menu setting was changed while the printer was
printing. Press the N Start/Stop button to clear this message. The
setting will become effective after printing has finished.
Alternatively you can clear this message by performing Reset or
Reset All on the control panel. However, the print data will be
deleted.
ROM CHECK
The printer is checking the ROM.
SELF TEST