Filter
Top Products
Using the Control Panel 273
7
7
7
7
7
7
7
7
7
7
7
7
Print Overrun
The required time to process the print data exceeded the print
engine speed because the current page is too complex. Press the
N Start/Stop button to resume printing, or press the + Cancel
Job button to cancel the print job. If this message appears again,
select On as the Page Protect setting in the control panel’s Setup
Menu or select Avoid Page Error on the printer driver.
If you continue to receive this message when printing a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.
To avoid this error, it is recommended that you set the Page
Protect setting to On and add more memory to the printer. See
"Setup Menu" on page 233 and "Memory Module" on page 303
for details.
PS3 Hard Disk full
The memory allocated for writing PostScript 3 commands on the
optional Hard Disk Drive is full.
To clear this error, select Clear Warning from the control panel’s
Reset Menu, or remove the downloaded PS fonts to make room
on the Hard Disk Drive. For instruction about accessing the
control panel menus, see "How to access the control panel menus"
on page 223.
RAM CHECK
The printer is checking the RAM.
Ready
The printer is ready to receive data and print.
Remove Toner