Filter
Top Products
372 Troubleshooting
The Properties dialog box does not appear or it
takes too much time to open it. (For Windows
users only)
For Windows users, EPSON Status
Monitor 3 is not installed.
For Macintosh users, you do not
re-register the printer.
For Windows users:
You have to install EPSON Status Monitor
3, or make settings manually in the printer
driver. See "Installing EPSON Status
Monitor 3" on page 109 or "Making
Optional Settings" on page 98.
For Macintosh users:
When you have attached or removed
printer options, you need to delete the
printer using Print Setup Utility (for Mac
OS X 10.3), Print Center (for Mac OS X 10.2
or below), or Chooser (for Mac OS 9), and
then re-register the printer.
Cause What to do
Bidirectional communication is
disabled.
Make sure that the printer is on and
connected with the appropriate cable.
Select the Enable bidirectional support
check box on the Port menu of the
Properties dialog box (for Windows XP,
2000, NT 4.0, or Server 2003) or in the printer
driver (for Windows Me or 98). Then select
the Do not display consumables
information check box in the
Consumables Info Settings dialog box.