Filter
Top Products
Replacing Consumable Products 319
9
9
9
9
9
9
9
9
9
9
9
9
9. Close cover D.
Photoconductor Unit
Handling precautions
Always observe the following handling precautions when
replacing the consumable products:
❏ The photoconductor unit weighs 1.3 kg (2.9 lb). Be sure to hold
it firmly by the handle when carrying it.
❏ When replacing the photoconductor unit, avoid exposing it
to room light any longer than three minutes.
❏ Be careful not to scratch the surface of the drum. Also, avoid
touching the drum, since oil from your skin may permanently
damage its surface and affect print quality.
❏ To get the best print quality, do not store the photoconductor
unit in an area subject to direct sunlight, dust, salty air, or
corrosive gases (such as ammonia). Avoid locations subject to
extreme or rapid changes in temperature or humidity.