Filter
Top Products
240 Using the Control Panel
Stops printing and clears the current job received from the active
interface. You may want to reset the printer when there is a
problem with the print job itself and the printer cannot print
successfully.
Reset All
Stops printing, clears the printer memory, and restores the printer
settings to their default values. The print jobs received from all
interfaces are erased.
Note:
Performing Reset All clears print jobs received from all interfaces. Be
careful not to interrupt someone else’s job.
SelecType Init
Restores the control panel menu settings to their default values.
Change Toner C/M/Y/K
Replace the indicated toner cartridge. See "Toner Cartridge" on
page 315 for details.
Quick Print Job Menu
This menu allows you to print or delete print jobs that were stored
in the printer’s Hard Disk Drive using the Quick Print Job feature
(Re-Print Job, Verify Job, Stored Job) of the printer driver’s
Reserve Job function. For instructions on using this menu, see
"Using the Quick Print Job Menu" on page 278.