Filter
Top Products
262 Using the Control Panel
Feed Offset2
Adjust the vertical position in which to star printing. The position
moves lower on the sheet as the value increases. This setting is
used when printing the printing on the backside of paper for
duplex printing.
Scan Offset2
Adjust the horizontal position in which to start printing. The
position moves to the right of the sheet as the value increases. This
setting is used when printing on the backside of paper for duplex
printing.
Status and Error Messages
This section contains a list of error messages shown on the LCD
panel, giving a brief description of each message and suggestions
for correcting the problem. Note that not every message shown
on the LCD panel indicates a problem. When the mark is
displayed at the left of the warning message, multiple warnings
occur. To confirm all warnings that occur, press the d Down
button to display the Status Menu, then press the Enter button.
The LCD panel also displays the amounts of remaining toners and
available paper sizes.
Calibrating Printer
The printer automatically calibrates itself. This is not an error
message, and will clear itself after the calibration process has
finished. While the printer displays this message, do not open the
covers or turn off the printer.
Cancel All Print Job