Filter
Top Products
264 Using the Control Panel
Check Paper Size
The paper size setting is different from the size of paper loaded
in the printer. Check to see if the correct size of paper is loaded in
the specified paper source.
To clear this error, select Clear Warning from the control panel’s
Reset Menu. See "How to access the control panel menus" on page
223 for instructions.
Check Paper Type
The media loaded in the printer does not match the paper type
setting in the printer driver. Media that matches only the paper
size setting will be used for printing.
To clear this error, select Clear Warning from the control panel’s
Reset Menu. See "How to access the control panel menus" on page
223 for instructions.
Clean Parts v v
Indicates that the printer needs to be cleaned using the cleaning
knob [a] or [b] (indicated as vv). See "Cleaning the
photoconductor wire (knob [a])" on page 338 or "Cleaning the
exposure window (knob [b])" on page 339 for instructions.
Clean Sensor
The sensor inside the printer needs to be cleaned. To clean the
sensor, open cover D and close it again.
Collate Disabled
Printing by specifying the number of copies is no longer possible
due to a lack of memory (RAM) or free disk space on the optional
Hard Disk Drive. If this error occurs, print only one copy at a time.