Filter
Top Products
286 Using the Control Panel
Note:
If the wrong toner cartridge was installed, the printer does not go
to the next step. Follow the instructions that appear on the LCD
panel.
5. After all color toner cartridges are installed, the printer
changes to the Color mode.
Note for Windows users:
If EPSON Status Monitor 3 is not installed, select the Color Toner
Cartridges check box on the Optional Settings dialog box. The
Optional Settings dialog box appears by clicking the Settings
button on the Optional Settings tab.
Note for Mac OS X users:
After changing the modes, you need to close all applications, delete
the printer using Print Setup Utility (for Mac OS X 10.3) or Print
Center (for Mac OS X 10.2 or below), and then re-register the
printer.
B/W mode to 4 x B/W mode
Follow the steps below to switch from the B/W mode to 4 × B/W
mode.
1. Make sure the LCD panel displays Ready or Sleep, then press
the Enter button to access the control panel menus.
2. Press the d Down button repeatedly until Mode Config. Menu
appears on the LCD panel, then press the Enter button.
3. Press the d Down button repeatedly until Change Mode 4 x
B/W is displayed, then press the Enter button.
4. When the LCD panel displays Insert K TnrCart, insert a
black toner cartridge into the printer. See "Replacing a toner
cartridge" on page 316 for instructions on how to insert a toner
cartridge.