Filter
Top Products
64 Paper Handling
Loading a custom paper size
You can load non-standard size paper (98 × 148 mm to 216 × 297
mm) into the MP tray as long as it meets the following size
requirements:
When loading a custom paper size, you should make paper
settings as shown below:
❏ Make settings on the Basic Settings in the printer driver.
Note:
❏ For Windows, access the printer driver, then select
User-Defined Size from the Paper Size list on the Basic
Settings tab. In the User Defined Paper Size dialog box, adjust
the Paper Width, Paper Length, and Unit settings to match
your custom paper. Then click OK and your custom paper size
will be saved.
❏ For Macintosh, access the printer driver, click Custom Size in
the Paper Setting dialog box. Then click New, adjust the Paper
Width, Paper Length, and Margin settings to match your
custom paper. Then enter the setting’s name, and click OK to
save your custom paper size.
❏ You can also make these settings on the Tray Menu in the
control panel. See "Tray Menu" on page 229.
Paper Size: User Defined Size
Paper Source: MP Tray (up to 16.5 mm thick
stack)
Paper Type: Plain or Thick