Filter
Top Products
266 Using the Control Panel
Unable to store form overlay data on the printer’s optional Hard
Disk Drive. Either the drive is full, or the maximum number of
form overlay files has been reached. Delete any form overlay files
you no longer need, then try storing the new overlay again.
To clear this error, select Clear Warning from the control panel’s
Reset Menu. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 223.
Form Feed
The printer is ejecting paper due to a user request. This message
appears when pressing the N Start/Stop button once to make the
printer offline, then holding down the N Start/Stop button for
more than 2 seconds in order not to receive form feed command.
Format Error ROM A
An unformatted ROM module has been inserted.
To clear this error, either press the N Start/Stop button or turn off
the printer and remove the ROM module, then reinstall the ROM
module. If that fails to clear the error, contact your dealer.
Hard Disk Full
The optional Hard Disk Drive is full and you cannot save any
data. Delete the unnecessary data from the Hard Disk Drive. To
clear this error, select Clear Warning from the control panel’s
Reset Menu. For instruction about accessing the control panel
menus, see "How to access the control panel menus" on page 223.
HDD CHECK
The printer is checking the Hard Disk Drive.
Image Optimum