Filter
Top Products
260 Using the Control Panel
Set the LCD control setting. When Auto is selected, the printer
controls the backlight of the LCD panel automatically. When the
printer is in sleep mode, the backlight is off. When On is selected,
the LCD backlight is always on.
Printer Adjust Menu
Enter the Support Mode by pressing the d Down button while
turning the printer on, to make the Printer Adjust Menu appear.
Note:
This menu is a special function. You don’t have to change it for ordinary
use.
Normal
Adjust the density for normal paper. The setting becomes darker
as the value increases.
Normal Back
Item Settings (default in bold)
Normal -4 ... 0 ... 5
Normal Back -4 ... 0 ... 5
Thick -4 ... 0 ... 5
Trnsprnc -4 ... 0 ... 5
Envelope -4 ... 0 ... 5
Highland 0 , 1
Feed Offset -3.5 ... 0.0 ... 3.5 mm
Scan Offset -3.5 ... 0.0 ... 3.5 mm
Feed Offset2 -3.5 ... 0.0 ... 3.5 mm
Scan Offset2 -3.5 ... 0.0 ... 3.5 mm