Filter
Top Products
362 Troubleshooting
If the optional Duplex Unit is installed, lift up the Duplex Unit.
Hold it and gently pull out any sheets of paper. Be careful not
to tear the jammed paper.
w
Warning:
Be careful not to touch the fuser, which is marked CAUTION
HIGH TEMPERATURE, or the surrounding areas. If the
printer has been in use, the fuser and the surrounding areas
may be very hot. If you must touch one of these areas, open
cover A and B, then wait 30 minutes to allow the heat to
subside before doing so.
5. Close cover A.