Filter
Top Products
Using the Control Panel 269
7
7
7
7
7
7
7
7
7
7
7
7
Invalid N/W Module
There is no network program, or the network program cannot be
used with your printer. Contact a qualified service representative.
Invalid P5C
The optional P5C Emulation Kit is installed, but the printer is in
the B/W mode or 4 × B/W mode. When you use the optional P5C
Emulation Kit, make sure that the printer is in the Color mode.
Invalid PS3
The PostScript3 ROM module is broken. Turn off the printer and
contact your dealer.
Invalid ROM A
The printer cannot read the installed optional ROM module. Turn
off the printer, then remove the ROM module.
Jam-Paper Size Error
A paper jam occurred because the wrong size paper has been
loaded. Clear the jammed paper and set the paper size setting
correctly. See "Clearing Jammed Paper" on page 345 to find how
to clear the jammed paper.
Manual Feed ssss
The manual feed mode is specified for the current print job. Make
sure the paper size indicated by ssss is loaded, then press the
N Start/Stop button.
Mem Overflow
The printer has insufficient memory to execute the current task.
Press the N Start/Stop button on the control panel to resume
printing, or press the + Cancel Job button to cancel the print job.