Filter
Top Products
Using the Control Panel 261
7
7
7
7
7
7
7
7
7
7
7
7
Adjust the density of the printing for back side of normal paper.
The setting becomes darker as the value increases.
Thick
Adjust the density for thick paper. The setting becomes darker as
the value increases.
Trnsprnc
Adjust the density for transparencies. The setting becomes darker
as the value increases.
Envelope
Adjust the density for envelopes. The setting becomes darker as
the value increases.
Highland
Prevents printing defects caused by abnormal electric discharge
that may occur when using the printer in locations at high
altitudes. Select 1 when using the printer in locations at high
altitudes.
Feed Offset
Adjust the vertical position in which to start printing. The position
moves lower on the sheet as the value increases. This setting is
used when doing single-sided printing or printing the first page
for duplex printing.
Scan Offset
Adjust the horizontal position in which to start printing. The
position moves to the right of the sheet as the value increases. This
setting is used when doing single-sided printing or printing the
first page for duplex printing.