Filter
Top Products
CHAPTER 6 Work after installation
6.4 Set up of SMTP
98
6.4 Set up of SMTP
See “3.3.9 Set up of Alarm E-Mail” for configuration of SMTP.
6.5 Set up of security
This section describes how to make the necessary settings to ensure security and notification of errors during operation.
Configure the security necessary for operation.
It is recommended to take the back-up of the set-up information when below mentioned set ups are completed. See “3.5
Save structural information” for the back-up of the set information.
- 6.5.1 Set up of access control
To secure the security of the MMB, set up access control according to Network Protocol.
For securing the security, it is recommended to set up access control at the time of installation. Access control can also be
set up after the installation.
Selection of Filters of Editing objects
Operations
1. Click [Network Configuration] - [Access Control].
→ [Access Control] window is displayed. For the details of [Access Control] window, see “1.5.10 [Access Control]
window” of PRIMEQUEST 2000 series Tool Reference (C122-E177EN)
FIGURE 6.4 Example of [Access Control] Window
2. Filters of editing objects are selected by radio button.
Addition and editing of filters
Operations