Filter
Top Products
CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration
44
FIGURE 3.28 Example of [IPv6 Console Redirection Setup] Window
2. Set IP address and the prefix length to access Console Redirection LAN for IPv6. When it is set automatically, IP
address and the prefix length is acquired by clicking on [Auto] button.
3. Enable video redirection and virtual media respectively.
4. Click [Apply] button.
3.4.7 Power OFF and ON of the partition
Power OFF and power ON are required for each partition to reflect the configuration change in the partition. For the details
of Power OFF and power ON, see CHAPTER 7Power ON and OFF of the partition”.
Remark
When the console is connected to the partition, processing continues until [UEFI] window is displayed after completion of
POST (Power On Self Test) and then it stops.
3.4.8 Confirmation of partition information
The status of the partition and the partition related information is displayed.
The partition configuration of the entire system of PRIMEQUEST 2000 series can be confirmed even by the [Partition
Configuration] window.
Operations
1. Click [Partition]-[Partition#x]-[Information].
[Information] window is displayed. For details on [Information] window, see “ [Information] window” of “1.3.8
[Partition#x] menu” of PRIMEQUEST 2000 series Tool Reference (C122-E177EN).