Filter
Top Products
CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
11
3.3.1 Connecting the MMB console PC
This section describes the connection of the MMB and MMB console PC.
To reconfigure the environment of the operation, connect the COM port of the MMB console PC and the External interface
RS232C (COM port) of the MMB with RS232C cross cable.
For the mounting location and external interface overview of the MMB, refer to the figure below.
FIGURE 3.1 External Views of Mounting Locations and External interface of MMB
TABLE 3.2 External interface of MMB
External interface
Quantity
Remark
RS232C(COM Port)
1
Used by the field engineer when setting-up the device. It does not use in
normal operations.
LAN 1000Base- T
2
User port
LAN 100Base-TX
2
Maintenance
-[LOCAL] : CE Port
-[REMOTE]: REMCS Port
Set the terminal software by using following contents, at the time of connecting COM port,
TABLE 3.3 contents of setting of terminal software
Setting item
Value
Bit/ second
19200
Data bit
8
Parity
No
Stop bit
1
Flow control
No
Emulation
VT100