Filter
Top Products
CHAPTER 4 Installation of Operating System and bundled software
4.8 Procedure of Hyper-V installation
65
2. Select [Server list].
3. Right click the partition targeted in the server list at the left side.
[Maintenance] − [ASR property] is selected on the displayed menu.
4. [Watch dog setting] is selected from the displayed window.
5. Click [Application] button by setting the following in [Software] item.
− Check ON the [Enable] check box.
− Select [Continuance operation] on the [Action] at the time of abnormal operation.
− Enter the value between 1~100 minutes for the [Time-out period].
6. Enter the user name / password and click [Enter] key.
4.7.5 Completion of VMware 5.x installation
Reboot the partition of PRIMEQUEST 2000 series after the completion of setting.
4.7.6 Installation of the bundled software
For the installation of bundled software, see “Installation of D.2 VMware 5.x bundled software”.
4.8 Procedure of Hyper-V installation
Install Hyper-V after installing the operating system (Windows Server 2008 R2, Windows Server 2012 or Windows Server
2012 R2).
4.9 Procedure of KVM installation
Install KVM after installing the operating system (Linux RHEL6).
See the following for the installation procedure of KVM.
PRIMEQUEST 2000 Series Simple Construction Guide (Linux/KVM edition).