Filter
Top Products
CHAPTER 4 Installation of Operating System and bundled software
4.10 Procedure to install SUSE Linux Enterprise Server 11 Service Pack 3 into the SAN Storage Unit
68
TABLE 4.7 Operating system installation with SVIM
Mode
Functional Overview
Purpose
Quick mode
You can simply use the minimum settings necessary for
operating system installation. This mode uses Fujitsu's
recommended settings.
For easy installation.
Guide mode
You can specify setup information by following the instructions
of the wizard. You can save the specified information in a
configuration file for use during reinstallation.
For detailed setting of RAID or OS.
All the screenshots are display examples. The contents displayed may differ depending on system configuration.
Operations
1. The settings are done to boot the ServerView Suite DVD from virtual media for the partition.
For details on configuration, see“1.6.2 Remote control operation (BMC)” of PRIMEQUEST 2000 series
Administration Manual (C122-E175EN).
2. The power supply of the partition is turned ON.
Note:
“Force boot from DVD” can be selected by the Boot Selector and can be activated from DVD or it can be activated
from the DVD drive by changing the boot order into DVD with UEFI.
When operating system corresponds to the UEFI mode, the installation can be done in UEFI mode by changing the
boot order according to the following procedure.
a. After turning on the power supply of the partition, while the FUJITSU logo is displayed, press any key (such as
[Space] key) except [Enter] key and the Boot Manager front page is displayed.
b. The menu is selected on the Boot Manager front page in the following order. [Boot Maintenance Manager]-
[Boot Options]-[Change Boot Order]-[Change the order]
c. UEFI:Fujitsu Virtual CDROMx xxx is set on the top step.
For details on the setting method of boot order, see “■ Change Boot Order of “3.5.2 [Boot Options] menu” of
PRIMEQUEST 2000 series Tool Reference (C122-E177EN).
d. [Commit Changes and Exit] - [Reset System] is specified and the partition is rebooted.
3. After a period of time, the language selection window is displayed.
In case of English, select “English”.
4. In initial display window, click [Next] button without setting anything.
5. Select [Deployment] in [Welcome ServerView Installation Manager] window.
6. Select installation mode, select operating system to be installed and set the operating system.
Remark
The IP address of LAN cannot be set in setting operating system. Set IP address after installing the operation system.
7. Click [Start installation].
The installation is started.
8. Replace with the installation medium of operating system according to the instructions of SVIM.
4.10.4 Configuring Bundled Software after Installation
After completing OS installation, configure the bundled software.
For details about the following settings, see the ServerView Mission Critical Option User Manual.
4.10.5 After installation, connecting SAN and internal HDD/SSD
For details on connecting the SAN and internal HDD after the installation, see the PRIMEQUEST 1000 Series SAN
Boot Environment Configuration Manual (C122-E155EN). Also, for details on driver parameters, see the readme
file that comes with the driver.