Filter
Top Products
CHAPTER 4 Installation of Operating System and bundled software
4.5 Procedure to install RHEL into internal HDD/SSD
58
See “3.4.5 Various mode settings”
3. [PCI ROM Priority] of BIOS is set.
- For the UEFI Install
- Set [Device Manager]-[PCI Subsystem Configuration]-[PCI ROM Priority] of BIOS menu to ”EFI Compatible
ROM”.
- For the UEFI Install:
- Set [Device Manager]-[PCI Subsystem Configuration]-[PCI ROM Priority] of BIOS menu to ”Legacy ROM”.
- Set [Device Manager]-[PCI Subsystem Configuration]-[OpROM Scan Configuration] of BIOS menu to “Enable”
only for booting Device.
4. The I/O space is allocated in the SAS card and in the SAS RAID controllerRAID card.
For details on allocation of I/O space, see “3.4.5 Various mode settings” and [Configure I/O Space Assignment]
menu” of PRIMEQUEST 2000 series Tool Reference (C122-E177EN).
4.5.2 Preparing for Installation
As distribution DVD of RHEL is not provided beforehand while installing RHEL, the user who has subscribed the RHEL
must create the DVD by himself.
Creating the RHEL Distribution DVD Image
Download the image file of distribution DVD by logging in to customer portal (https://access.redhat.com/) of Red Hat, Inc. by
using other system.
Note
The image file of the distribution DVD differs with respect of the minor release and architecture (for Intel64). Therefore,
download the intended DVD image file.
Remark
It is necessary to register in the customer portal of Red Hat, Inc. for subscription before downloading the file.
Preparing for Boot
All FC cables are removed.
4.5.3 Installation
The operating system installation with SVIM is explained.
There are the following types for operating system installation with SVIM. For the detailed procedure of each mode, see
ServerView Suite ServerView Installation Manager.
TABLE 4.4 Operating system installation with SVIM
Mode
Functional Overview
Purpose
Quick mode
You can simply use the minimum settings necessary for
operating system installation. This mode uses Fujitsu's
recommended settings.
For easy installation.
Guide mode
You can specify setup information by following the instructions
of the wizard. You can save the specified information in a
configuration file for use during reinstallation.
For detailed setting of RAID or OS.
All the screenshots are display examples. The contents displayed may differ depending on system configuration.
Operations
1. The settings are done to boot the ServerView Suite DVD from virtual media for the partition.
For details on configuration, see“1.6.2 Remote control operation (BMC)” of PRIMEQUEST 2000 series
Administration Manual (C122-E175EN).
2. The power supply of the partition is turned ON.