Filter
Top Products
CHAPTER 4 Installation of Operating System and bundled software
4.2 Procedure to install Windows in SAN/iSCSI storage device
49
2. The power supply of the partition is turned on.
Notes
It can be started by selecting "Force boot from DVD" by Boot Selector or it can be started from the virtual media by
changing the boot order to DVD by UEFI.
When the operating system corresponds to UEFI mode then the installation can be done in the UEFI mode by
changing the boot order by the following procedure.
a. After the power supply of partition is turned on, press any key (such as the [Space] key except the [Enter] key
until the Fujitsu logo is displayed and the Boot Manager front page is displayed when any key (such as the
[Space] key) is pressed.
b. The menu is selected in the following order by the Boot Manger front page. [Boot Maintenance Manager]- [Boot
Options]- [Change Boot Order]- [Change the order]
c. UEFI: Fujitsu Virtual CDROMx xxx is set at the upper-most step. For the Boot order setting method, see “
Change of priority level (Change Boot Order)” of “3.5.2 [Boot Options] menu” of PRIMEQUEST 2000 series
Tool Reference (C122-E177EN).
d. [Commit Changes and Exit] – [Reset System] is specified and the partition is rebooted.
3. After a period of time, the language selection window is displayed. In case of English, select "English".
4. Click the "Next" button without setting anything on the initial display window.
5. [Deployment] is selected by the [To Welcome ServerView Installation Manager].
6. Installation mode is selected, operating system to be installed is selected and the operating system is set.
Remark
IP address of LAN cannot be set by the setting of operating system. Set the IP address after operating system
installation.
7. Click “Installation start-up”.
The installation starts.
8. It is replaced to the installation medium of operating system according to the SVIM instruction.
4.2.4 Bundled software setting after installation is completed
Bundled software is set after the completion of operating system installation.
1. OneCommand Manager is installed in the following cases.
- When the Emulex FC card or Converged Network Adapter Card is mounted.
And
- When OneCommandManager is not installed
The installation condition of OneCommandManager is determined by the presence of [Emulex] – [OneCommand
Manager] under the [start] menu – [all programs].
Note
In Windows Server 2012 or Windows Server 2012 R2, “the [start] menu – [all programs]“ should read “the [start]
menu – [all apps]“.
a. Driver/Utility of MC-0JFC3X, MC-0JFC4X, MC-0JFC7X, MC-0JFC8X or MC-0JCE3X is downloaded from the
following URL.
http://support.ts.fujitsu.com/
Note
Driver/ Utility can be used by the PRIMEQUEST 2000 series though PRIMERGY is described in the
downloaded binary.
b. The downloaded file is executed by a double click.
The prompt window of cmd.exe (black window) is displayed for a while and the file is extracted.
c. The window closes automatically after the extraction is completed.
The download file is extracted and folder or file is newly created.
Remark
If the window does not close even if "Complete" is displayed on the title bar of the window then click the "Close"
button and close the window.
d. Double click and execute "elxocm-windows-x86-XXXXX.exe"(in case of x86, 32-bit OS) or "elxocm-windows-
x64-XXXXX.exe"(in case of x64, 64-bit OS) in "FC_vXXXXXX" directory created by extraction.
Remark
"XXXX" shows the version number. Read properly.
2. Qlogic Converge Console (GUI/CLI) is installed in the following cases.
- When the Qlogic FC card is mounted.
And