Filter
Top Products
CHAPTER 6 Work after installation
6.5 Set up of security
103
FIGURE 6.9 Example of [SNMP Community] Window
2. Enter the required items.
Maximum 16 Communities can be set. The details regarding the community to be set, IP Address where Access is
permitted, SNMP version, Access authority and authentication are entered.
At the time of deletion, click the items of [Community] and [IP Address].
3. Click [Apply] button.
Set up transmission destination of SNMP trap
Operations
1. Click [Network Configuration] - [SNMP Configuration] - [Trap].
→ [SNMP Trap] window is displayed. See “[“■ [SNMP Trap window] window” of 1.5.6 [SNMP Configuration] Menu”
of PRIMEQUEST 2000 series Tool Reference (C122-E177EN) for the details of [SNMP Trap] window.