Filter
Top Products
CHAPTER 3 Work before Operating System Installation
3.3 Connection and Setting of MMB
29
3.3.12 Setting of Date and Time
The date, time and NTP (In case of NTP server) of the MMB is set
However, occasionally it is already set by the field engineer. If it is already set by the field engineer and if it is not required to
be changed, go to the next setting.
For the backup of the set information, see“3.5 Storage of the configuration information”.
Remark
MMB
provides NTP client function. The NTP client function of MMB adjusts the time on the basis of another NTP Server.
For a stable NTP operation, specify multiple NTP Servers from each NTP client (In case of RHEL more than three servers
are recommended).
Operations of [Date/ Time] window
1. Click [Network Configuration] - [Date/Time].
→ [Date /Time] window is displayed. For details on [Date /Time] window, see “1.5.1 [Date/Time] window” of
PRIMEQUEST 2000 series Tool Reference (C122-E177EN).
FIGURE 3.16 [Date/ Time] Window Example
2. Input required items.
3. Click [Apply] Button.
Operations of [Management LAN Port Configuration]
1. Click [Network Configuration] - [Management LAN Port Configuration].
→ [Management LAN Port Configuration] window is displayed. For details of [Management LAN Port Configuration]
window, see “1.5.3 [Management LAN Port Configuration] window” of PRIMEQUEST 2000 series Tool Reference
(C122-E177EN).