Filter
Top Products
CHAPTER 3 Work before Operating System Installation
3.4 Partition Configuration
40
FIGURE 3.26 Example of [Partition Configuration] Window
Remark
Above mentioned window is used in case of maximum configurations.
2. Select partition which sets the partition name and enter the partition name in [Partition name] cell.
Remark
The name can be input up to 16 characters. The characters that can be used are as follows.
[0-9], [a-z], [A-Z], half-width space, # (Sharp), _ (Underline), and – (Hyphen)
3. Click [Set Partition Name] button.
Name is set for the selected partition.
3.4.5 Various mode settings
Dynamic Reconfiguration, Memory operation mode, and Hyper Threading Mode, etc. of the partition are set. Setting items
are set by MMB Web-UI and UEFI. Following table lists the setting items and screen transition.
For details on the respective settings, see PRIMEQUEST 2000 series Tool Reference (C122-E177EN)