Filter
Top Products
89
CHAPTER 2 DEPENDENCE FUNCTIONS
[Example]
>SET EVENT 1,func1
>SET EVENT/WRITE 2,data[2],!d=h'10
>SET EVENT/MODIFY 3,102
An event can be set in the Event window as well.
■ Event Modes
There are three event modes as listed below. To determine which function event triggers are used for, select
one using the SET MODE command. The default is normal mode.
The event value setting are made for each mode, so switching the event mode changes the event settings as
well.
- Normal Mode
Event triggers used for sequencer.
Since the sequencer can perform control at 8 levels, it can control sequential breaks, time measurement
and trace sampling. Real-time tracing in the normal mode is performed by single trace (tracing function
that samples program execution continuously).
- Multi Trace Mode
Event triggers used for multitracing (trace function that samples data before and after event trigger
occurrence).
- Performance Mode
Event triggers are used for performance measurement to measure time duration between two event trigger
occurrences and count of event trigger occurrences.