Filter
Top Products
116
CHAPTER 2 DEPENDENCE FUNCTIONS
■ Displaying All Machine Cycles (Specify /CYCLE.)
Detailed information at all sampled machine cycles can be displayed. In this mode, both single trace and
multi trace data can be displayed in almost identical formats. (In the multi trace mode, the local frame
number and block number are added.)
In this mode, data can be displayed in the following format. For further details, see the descriptions of the
SHOW TRACE, and SHOW MULTITRACE commands. In this mode, source is not displayed regardless of
the setup made using the SET SOURCE command.
Data access
internal read access
:
Read access to
internal memory
internal write access
:
Write access to
internal memory
external read access
:
Read access to
external memory
external write access
:
Write access to
external memory
>SHOW TRACE/INSTRUCTION -194
step no. address mnemonic level
\sub4:
-00194 : FF0106 LINK #00 4
-00193 : 000186 internal read access. 10F2 5
-00192 : 1010E6 external write access. 10F2 5
-00191 : 000186 internal write access. 10E6 5
-00190 : FF0108 ADDSP #F8 5
-00189 : FF010A MOVL A,001A 5
-00188 : 10001A external read access. 0000 5
-00187 : 10001C external read access. 4000 5
-00186 : FF010E MOVL @SP+04,A 5
-00185 : 1010E2 external write access. 0000 5
-00184 : FF0111 MOVL A,0016 5
-00183 : ** RESET **
>
Step Number
Address
Disassemble
Description
Data
Device Status
Decimal, signed
Hexadecimal
Indecates instruction
executed
Hexadecimal
Indicates sequencer level
executed when trace sampled.
Indicates 0 if sequencer not
in use.
** STANDBY **
:
Hardware standby
** RESET **
: Reset
** THOLD **
: Tool hold
** UHOLD **
: User hold
** WAIT **
:
Ready pin input
** SLEEP **
: Sleep
** STOP **
: Stop
Display of sequencer level