Filter
Top Products
274
CHAPTER 2 DEPENDENCE FUNCTIONS
2.6.1.1 Operating Environments of the Target
This section describes the setting of the target operating environments of the MB2100-01
emulator debugger.
■ Operating Environments of the Target
In this emulator debugger, it is necessary to set the following items according to the operating environments
of the target.
• Source oscillation frequency
• Length of DEBUG I/F cable
These settings influence the communication speed of the debugger.
● Source oscillation frequency
Set main clock (MCLK).
The communication speed between MB2100-01 and the user system varies depending on the main clock.
● Length of DEBUG I/F cable
Specified the length of the cable that suits the length of DEBUG I/F cable.
The allowance maximum transfer rate from MB2100-01 to the direction of MCU changes according to this
length of the cable.
■ How to set
The setup wizard sets the operating environments of the target.
For details, refer to "4.7.2.5 Setup Wizard" in "SOFTUNE Workbench Operation Manual".
Figure 2.6-1 Setup Wizard (Communication Setting)