Filter
Top Products
41
CHAPTER 2 DEPENDENCE FUNCTIONS
2.1.7 Low-Power Consumption Mode Simulation
This section describes the low-power consumption SOFTUNE Workbench mode
simulation executed by SOFTUNE Workbench.
■ Low-Power Consumption Mode Simulation
The MCU enters the low-power consumption mode in accordance with the MCU instruction operation (Write
to SLEEP bit or STOP bit of standby control register). Once in the sleep mode or stop mode, a message
("sleep" for sleep mode, "stop" for stop mode) is displayed on the Status Bar. The loop keeps running until
either an interrupt request is generated, or the [Debug] - [Abort] menu is executed. Each cycle of the loop
increments the count by 1. During this period, I/O port processing can be operated. Writing to the standby
control register using a command is not prohibited.