Filter
Top Products
197
CHAPTER 2 DEPENDENCE FUNCTIONS
■ Specifications List
• SOFTUNE format
- To display in the RAM Checker viewer (recommended)
- Default extension is ".SRL".
•CSV format
- To display in other applications than the RAM Checker viewer
- Default extension is ".CSV".
Note:
The CSV format requires size of data approximately 4 times that of the SOFTUNE format.
■ To Use the RAM Checker
User sets the monitoring points, Log File, logging status by GUI or Command to use the RAM Checker.
•GUI
- Set the debug function to "RAM Checker" mode by using [Debug] - [Select Debug Function].
- By short cut menu [Setup...] on the Ram checker Window, user sets the monitoring points.
- By short cut menu [File...] on the Ram checker Window, user sets the Log File.
- By checking the short cut menu: [Logging start] on the Ram checker Window, a logging status of the
Ram Checker becomes to enable.
• COMMAND
- Set the debug function to "RAM Checker" mode by using SET MODE/CONFIG command.
- By command: SET RAMCHECK, user sets the monitoring points.
- By command: SET RAMCHECK, user sets the Log File.
- By command: ENABLE RAMCHECK, a logging status of the Ram Checker becomes to enable.
After these commands are set, user program execute and Log File is created by stopped user program. If it is
restarted, a Log File is overwritten.
Note:
If a setting of Overwrite control is enabled on Setup file dialog, a Log File is saved with different name
every other execution.
Monitoring Point Count 16 points
Size Bytes/word (16 bits)
Event Functions Max. 8 Points
Sampling Time 1 ms (Fixed)
Update Intervals 100 ms (Fixed)
Log File Formats SOFTUNE format or CSV format