Filter
Top Products
Servicing Customer-Replaceable Units 83
3. Close the latch to lock the drive in place.
4. If you performed any additional service procedures, see “Power On the Server”
on page 157.
Hard Drive Device Identifiers
The following table lists physical drive locations and their corresponding default
path names in OpenBoot PROM and Solaris for the server.
Note – Hard drive names in ILOM messages are displayed with the full FRU name,
such as /SYS/HDD0.
Related Information
■ “Hard Drive LEDs” on page 84
Device Device Identifier OpenBoot PROM/Solaris Default Drive Path Name
HDD0 /SYS/HDD0 c0::dsk/d1t0d0
HDD1 /SYS/HDD1 c0::dsk/d1t1d0
HDD2 /SYS/HDD2 c0::dsk/d1t2d0
HDD3 /SYS/HDD3 c0::dsk/d1t3d0