Fujitsu T5440 Server User Manual


 
120 SPARC Enterprise T5440 Server Service Manual June 2011
Related Information
“Servicing the DVD-ROM Drive” on page 122
Remove the Front Bezel
Before you begin, complete these tasks:
Read the section, “Safety Information” on page 63.
If you are performing additional service procedures, power off the server, using
one of the methods described in the section, “Powering Off the System” on
page 67.
“Extend the Server to the Maintenance Position” on page 70
“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 73
Do the following :
1. Grasp the front bezel on the left and right sides.
2. Pull the bezel off of the front of the chassis.
The bezel is secured with three snap-in posts.