Filter
Top Products
28 SPARC Enterprise T5440 Server Service Manual • June 2011
EXAMPLE: Output of the show components Command With No Disabled Components
EXAMPLE: Output of the show components Command Showing Disabled Components
▼ Display Individual Component Information
(ILOM show Command)
Use the show command to display information about individual components in the
server.
● At the -> prompt, enter the show command.
In EXAMPLE: show Command Output on page 29, the show command is used to
get information about a memory module (FB-DIMM).
-> show components
Target | Property | Value
--------------------+------------------------+-------------------------------
/SYS/MB/PCIE0 | component_state | Enabled
/SYS/MB/PCIE3/ | component_state | Enabled
/SYS/MB/PCIE1/ | component_state | Enabled
/SYS/MB/PCIE4/ | component_state | Enabled
/SYS/MB/PCIE2/ | component_state | Enabled
/SYS/MB/PCIE5/ | component_state | Enabled
/SYS/MB/NET0 | component_state | Enabled
/SYS/MB/NET1 | component_state | Enabled
/SYS/MB/NET2 | component_state | Enabled
/SYS/MB/NET3 | component_state | Enabled
/SYS/MB/PCIE | component_state | Enabled
-> show components
Target | Property | Value
--------------------+------------------------+-------------------------------
/SYS/MB/PCIE0/ | component_state | Enabled
/SYS/MB/PCIE3/ | component_state | Disabled
/SYS/MB/PCIE1/ | component_state | Enabled
/SYS/MB/PCIE4/ | component_state | Enabled
/SYS/MB/PCIE2/ | component_state | Enabled
/SYS/MB/PCIE5/ | component_state | Enabled
/SYS/MB/NET0 | component_state | Enabled
/SYS/MB/NET1 | component_state | Enabled
/SYS/MB/NET2 | component_state | Enabled
/SYS/MB/NET3 | component_state | Enabled
/SYS/MB/PCIE | component_state | Enabled