Filter
Top Products
104 SPARC Enterprise T5440 Server Service Manual • June 2011
▼ Remove a CMP/Memory Module
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 63.
■ Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 67.
■ “Extend the Server to the Maintenance Position” on page 70
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 73
■ “Remove the Top Cover” on page 73
Do the following :
1. Identify the module you want to remove.
2. Rotate the ejector levers up and away from the module.
3. Slide the module up and out of the system.
4. Place the module on an antistatic mat.