Fujitsu T5440 Server User Manual


 
148 SPARC Enterprise T5440 Server Service Manual June 2011
Servicing the Front Control Panel
The front control panel contains system status LEDs and the Power button.
This topic includes the following:
“Remove the Front Control Panel” on page 148
“Install the Front Control Panel” on page 149
Related Information
“Infrastructure Boards and Cables” on page 1
“Front Panel Diagram” on page 3
“Front Panel LEDs” on page 5
Remove the Front Control Panel
Before you begin, complete these tasks:
Read the section, “Safety Information” on page 63.
Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 67.
“Disconnect Power Cords From the Server” on page 68
“Remove the Server From the Rack” on page 71
“Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 73
“Remove the Top Cover” on page 73
“Remove a Fan Tray” on page 87
“Remove the Fan Tray Carriage” on page 133
1. Unplug the front control panel cable from J9901 on the motherboard.
2. Unplug the front control panel cable from the front I/O board.
3. Remove the two No. 2 Phillips screws.