Filter
Top Products
70 SPARC Enterprise T5440 Server Service Manual • June 2011
▼ Extend the Server to the Maintenance Position
1. (Optional) Use the set /SYS/LOCATE command from the -> prompt to locate
the system that requires maintenance.
Once you have located the server, press the Locator LED and button to turn it off.
2. Verify that no cables will be damaged or will interfere when the server is
extended.
Although the cable management arm (CMA) that is supplied with the server is
hinged to accommodate extending the server, you should ensure that all cables
and cords are capable of extending.
3. From the front of the server, release the two slide release latches (FIGURE:
Extending the Server Into the Maintenance Position on page 70).
Squeeze the slide rail locks to release the slide rails.
FIGURE: Extending the Server Into the Maintenance Position
-> set /SYS/LOCATE value=Fast_Blink
Figure Legend
1 Slide Rail Lock
2 Inner Rail Release Button