Filter
Top Products
Managing Faults 49
EXAMPLE: ALOM CMT Alert of PSH Diagnosed Fault
The ILOM show faulty command provides summary information about the fault.
See “Detect Faults (ILOM show faulty Command)” on page 37 for more information
about the show faulty command.
Note – The Service Required LED is also turned on for PSH diagnosed faults.
Related Information
■ “Diagnostic Flowchart” on page 13
■ “Predictive Self-Healing Overview” on page 20
■ “ILOM-to-ALOM CMT Command Reference” on page 58
■ SPARC Enterprise T5440 Server Administration Guide
■ Integrated Lights Out Manager 3.0 Supplement for the SPARC Enterprise T5440 Server
▼ Detect Faults Identified by the Oracle Solaris
PSH Facility (ILOM fmdump Command)
The ILOM fmdump command displays the list of faults detected by the Oracle Solaris
PSH facility and identifies the faulty FRU for a particular EVENT_ID (UUID).
Note – Do not use fmdump to verify that a FRU replacement has cleared a fault,
because the output of fmdump is the same after the FRU has been replaced. Use the
fmadm faulty command to verify that the fault has cleared. See “Clear Faults
Detected by PSH” on page 54.
1. Check the event log using the fmdump command with -v for verbose output.
In the following example, a fault is displayed, indicating the following details.
■ Date and time of the fault (Jul 31 12:47:42.2007)
■ Universal Unique Identifier (UUID). The UUID is unique for every fault
(fd940ac2-d21e-c94a-f258-f8a9bb69d05b)
■ Message identifier, which can be used to obtain additional fault information
(SUN4V-8000-JA)
SC Alert: Host detected fault, MSGID: SUN4V-8000-DX