96 SPARC Enterprise T5440 Server Service Manual • June 2011
See “Power Supply LED” on page 95 for specific information about power supply
status LEDs.
Related Information
■ “Managing Faults” on page 11
■ “Hot-Pluggable and Hot-Swappable Devices” on page 75
■ “Front Panel LEDs” on page 5
■ “Rear Panel LEDs” on page 8
Servicing PCIe Cards
This topic includes the following
■ “Remove a PCIe Card” on page 96
■ “Install a PCIe Card” on page 97
■ “Add a PCIe Card” on page 98
■ “PCIe Device Identifiers” on page 99
■ “PCIe Slot Configuration Guidelines” on page 100
▼ Remove a PCIe Card
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 63.
■ Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 67.
■ “Extend the Server to the Maintenance Position” on page 70
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 73
■ “Remove the Top Cover” on page 73
Do the following :
1. Identify the PCIe card you want to remove.
2. Open the PCIe card latch.