Filter
Top Products
Managing Faults 41
▼ View ILOM Event Log
● Type the following command:
Note – The ILOM event log can also be viewed through the ILOM BUI or the ALOM
CMT CLI.
If a “major” or “critical” event is found that was not expected and not included
under ILOM show faulty than it may indicate a system fault. The following is an
example of unexpected major events in the log.
Detecting Faults (Oracle VTS Software)
This topic includes the following:
■ “About Oracle VTS Software” on page 42
■ “Verify Installation of Oracle VTS Software” on page 42
■ “Start the Oracle VTS Browser Environment” on page 43
■ “Oracle VTS Software Packages” on page 45
■ “Useful Oracle VTS Tests” on page 46
-> show /SP/logs/event/list
-> show /sp/logs/event/list
1626 Fri Feb 15 18:57:29 2008 Chassis Log major
Feb 15 18:57:29 ERROR: [CMP0 ] Only 4 cores, up to 32 cpus are
configured because some L2_BANKS are unusable
1625 Fri Feb 15 18:57:28 2008 Chassis Log major
Feb 15 18:57:28 ERROR: System DRAM Available: 004096 MB
1624 Fri Feb 15 18:57:28 2008 Chassis Log major
Feb 15 18:57:28 ERROR: [CMP1 ] memc_1_1 unused because associated
L2 banks on CMP0 cannot be used
1623 Fri Feb 15 18:57:27 2008 Chassis Log major
Feb 15 18:57:27 ERROR: Degraded configuration: system operating at
reduced capacity
1622 Fri Feb 15 18:57:27 2008 Chassis Log major
Feb 15 18:57:27 ERROR: [CMP0] /MB/CPU0/CMP0/BR1 neither channel
populated with DIMM0 Branch 1 not configured