Filter
Top Products
GEK-00029A 5000 Series Programmer’s Manual
191
DECSHTS Set Horizontal Tab Stops:
This sequence will set multiple horizontal
tab stops.
DECSHTS
allows up to 16 tab stops to be set at once. Up
to 32 horizontal tabs can be stored. If more than 32 tabs are specified
by the escape sequence, the leftmost 32 will be retained. The Pn
values can be in any order in the escape sequence. The value units
are in decipoints, pixels, or character cells depending on the selection
of PUM and SSU.
General Command Syntax
ESC [
P1 ; P2 ; ... ; P32
u
Decimal: 27 71
Pn1
;
Pn2
; ... ;
Pn16
u
Hex: 1B 5B
Pn1
3B …
Pn16
75
BASIC: CHR$(27);"[";
Pn1
;";";
Pn2
;";"; ... ;
Pn16
;"u";
DECSVTS Set Vertical Tab Stops:
This sequence will set multiple vertical tab
stops. DECSVTS allows up to 16 tab stops to be set at once. Up to
67 vertical tabs can be stored. The default is set to stop at every line.
The Pn values can be in any order in the escape sequence. The value
units are in decipoints, pixels, or lines depending on the selection of
PUM and SSU.
General Command Syntax
ESC [
Pn1
;
Pn2
; ... ;
Pn16
v
Decimal: 27 71
Pn1
;
Pn2
; ... ;
Pn16
v
Hex : 1B 5B
Pn1
3B …
Pn16
76
BASIC: CHR$(27);"[";
Pn1
;";";
Pn2
;";"; ... ;
Pn16
;"v";
NOTE
The tabs are set and sorted into the current settings. If the
current settings are 1", 2", and 3", a command to set a tab at
1.5" would now have four tab sets.
NOTE
The tabs are set and sorted into the current settings. If the
current settings are 1", 2", and 3", a command to set a tab at
1.5" would now have four tab sets.