Filter
Top Products
Chapter 8. PPL3 Plus Emulation GEK-00029B
248
SVS Set Vertical Spacing:
Selects line spacing for monospace printing.
Source:
Application
Destination:
Level 3
Format
CSI Ps SP L
Description
Determines the Vertical Advance Increment (VAI). If Proportional
Spacing Mode (DECPSP) is set, SVS has no immediate effect.
Select the SVS parameter as follows:
Ps Centipoints LPI
0 1200 6
1 1800 4
2 2400 3
360012
49008
5 1416 6/30mm, 5mm
6 2136 4/30mm, 7.5mm
7 2856 3/30mm, 10 mm
8 720 12/30mm, 2.5 mm
9 3600 2, ½ in.
SVS does not affect character size or vertical tab stops.
The following table shows the resulting error accumulation over 25
centimeters.
Error
Parameter Lines 1/300 in. Inches Millimeters
5 50 2.50 1/120 0.2
6 33 13.86 1/21 1.0
7 25 22.00 1/14 2.0
8 100 50.00 1/6 4.0