Filter
Top Products
Chapter 4. Printronix P Series Emulation GEK-00029B
84
Select International
Selects the international character using the parameter (where the
Character Set
parameter is one of the values in the table below).The ultimate
character set selected is a function of the parameter and the
currently-active code page.
Format
<SFCC> P S E T ; n or <SFCC> R n
Decimal: <SFCC> 80 83 69 84 59 n
Hex: <SFCC> 50 53 45 54 3B nH
BASIC: CHR$(<SFCC>);”PSET;”;CHR$(n);
International Character Set
n Character Set Select
PSET CP 437 CP 8859-1 CP 8574
0 ASCII (USA) ASCII (USA) ASCII (USA)
1 French EBCDIC French
2 German German
3 English English
4Danish Nor./Danish
5 Swedish Swedish
6 Italian Italian
7 Spanish Spanish
8 Japanese Japanese
9 F. Canadian F. Canadian
10 Latin Am. Dutch
11 Finnish Finnish
12 Swiss Swiss
Indeterminate Conditions
Selecting SFCC RX accesses the substitution table for the current
character set.
Notes
This command implementation is different than the target printer
due to limitations in Font character sets. Refer to the “Emulation
Differences” section of this chapter.
Bold Print ON
Selects Bold Print mode. All characters are printed twice using direct
overprint (striking each dot twice) until reset by the Bold Print off
code or a printer reset. When SFCC j is used, Bold Print printing is
selected for one line only; it is reset by the Bold Print off control code,
emulation reset, or a paper motion command.
Format
<SFCC> G
Decimal: <SFCC> 71
Hex : <SFCC> 47
BASIC: CHR$(<SFCC>);”G”