Filter
Top Products
Chapter 7. Dec LG/Compaq LG Plus Emulation GEK-00029B
192
DECSHORP Set Horizontal Pitch:
This sequence will set the number of
characters printed per horizontal inch on a line. In addition to
changing character size, this sequence will reset the left and right
margins and will retain the current horizontal tab settings. Ps selects
the horizontal pitch as defined in the following chart.
General Command Syntax
ESC [
Ps
w
Select Horizontal Pitch
Ps Horizontal Pitch
0 10 characters per inch
1 10 characters per inch
2 12 characters per inch
3 13.3 characters per inch
4 16.7 characters per inch
5 5 characters per inch
6 6 characters per inch
7 6.6 characters per inch
8 8.25 characters per inch
9 15 characters per inch
Decimal: 27 71
Ps
91
Hex : 1B 5B
Ps
77
BASIC: CHR$(27);”[“;
Ps
;”w”;
DECVERP Set Vertical Pitch:
This sequence will set the number of lines per
inch on the page. Ps selects the vertical pitch as defined in the
following chart.
General Command Syntax
ESC [
Ps
z
Select Vertical Pitch
Ps Vertical Pitch
0 6 lines per inch
1 6 lines per inch
2 8 lines per inch
3 12 lines per inch
4 2 lines per inch
5 3 lines per inch
6 4 lines per inch
10 6 lines per inch
11 6 lines per inch
Indeterminate Conditions
No parameter will result in a default of 6 LPI. Values not listed are
ignored.
Decimal: 27 71
Ps
94
Hex: 1B 5B
Ps
7A
BASIC: CHR$(27);”[“;
Ps
;”z”;